Soundsmith MMP4 Phono Preamp

** Newly Updated and Improved! **

An upgrade in quality does not have to deplete your wallet.

The Soundsmith MMP & MCP preamps are revolutionary designs for their price - and the comments we get at each hi-fi show prove it. These preamps are what we use to demo our cartridges at all our shows even our high end cartridge designs -

Each hand - made preamp circuit is housed in a high quality aluminum case, powered by an external DC power supply, with easy to set up instructions. All amplifiers have extremely accurate RIAA equalization response.

Our MMP4 is a more cost effective way to enjoy your high output MC, MM or MI cartridge. Its design is based on our highly praised MMP3, and the specs and sonics make it a great value. It features 47K loading and 43 dB of gain.

Employing very high quality components, the MMP4 assures noise free and ultra-low distortion to allow unfettered enjoyment from your treasured vinyl collection. The MMP4 and MMP3 have been favorably demonstrated against preamps costing $2000 - $4000 with surprising results... and compliments to Soundsmith.

Contact us if you have any questions.

· Specifications

Optional, for all models we can built 50 ohm output, i.e. for driving long lines. $300 extra

Dimensions for the MMP4, MMP3 and MCP-2 (without the knob, which adds 3/4" to the height) 
7” deep, 1&1/2” high, and 4&1/4” wide.
_________________________________________________________________________________________________________________________________________________________________________________________
Overload specs for our preamps: Output clipping into 10K Ohms = 8.3 Volts RMS - all models.

Input overload levels for output clipping or non linearity:
MMP3/MMP4 ~~~ 20Hz - 5.3 mV; 1Khz - 53 mV; 20KHZ - 530 mV;
MCP-2 ~~~~ 20Hz - 1.4 mV; 1Khz - 5.3 mV; 20KHZ - 35 mV with input load set to 200 Ohms;

*standard values, other gain and loading options can be configured on request, $100 extra - select 'custom made' option from order form below and be sure to tell us what you'd like!

Our MMP3 and MMP4 (Moving Magnet Preamps) work well with any of our Medium and High Output cartridge lines, and other similar cartridges. Our MCP2 (Moving Coil Preamp) works well with any of our Low Output (Moving Iron / Fixed Coil) cartridge line. For Very High (>4.5mV) Output cartridges we offer as an option lowered gain versions of our MMP3 or MMP4 preamps.

THD measurements 1kHz, ~0.004%

24 volt DC power supply included. We will ship the "US" 120v version OR the 230 volt "Euro" version depending on country of destination, contact us if you have non standard preference.

IN STOCK!!

for Credit/Debit card, or PayPal purchase, use Add To Cart Button

799.95

Select location for shipping fee amount, we can ship up to three items under the shipping fee, use the Additional Item option for 2nd or 3rd item, if you have already the shipping fee in your basket

(50 OHM output MMP4) IN STOCK!!

for Credit/Debit card, or PayPal purchase, use Add To Cart Button

1099.95

Select location for shipping fee amount, we can ship up to three items under the shipping fee, use the Additional Item option for 2nd or 3rd item, if you have already the shipping fee in your basket

Specification

• Workmanship on this product is warranted for 2 full years

Specifications

Related Products

Soundsmith MMP3 Phono Preamp

Soundsmith MCP2 Phono Preamp

Additional images