|
The CDT-4 is a non-invasive tester for CD players,
DVD, Laser disc players, CD ROM's, computers, preamplifiers,
amplifiers, tuners, DAT's, VCR's, tape decks and Telephony
equipment.
The CDT-4 tests for intermittent signal level change, CD
skips, noise distortion or loss of signal. Errors are logged
for up to 5 days or more in non-volatile memory and are
displayed on large numeric LED's. Error information can also
be fed via an RS232 port to a computer or printer for complete
error printout. The CDT-4 comes with a specially engineered
audio CD, and may be used for automated integrity testing of
any analog signal path. It runs on either the supplied 13 volt
AC transformer, or on 12 volts DC for automotive stereo
testing.
Users for the tester include audio servicers, custom home
installers, audio retailers, engineers and service personnel
in the radio and television broadcast industries, computer
sales and service people, audio manufacturers, automotive
stereo dealers/servicers and those involved in telephony
testing.
The problem with any electronic service is that failures
can be caused by temperature induced stresses, condition of
components, assembly errors, etc., and many of these failures
are intermittent in nature. Unlike the situation where there
is a catastrophic failure and subsequent repair can easily be
confirmed, intermittent failures must be tested at length both
prior to repair and afterwards in the effort to establish what
the likely fault is, and to provide confirmation that a repair
has been properly effected.
Until now, the only method for such testing was to listen
to the unit being serviced constantly and carefully. If more
than one unit is being serviced (which is often the case for
repair shops), such monitoring is simply not possible. An
excellent solution is our CDT-4 tester, a stand-alone device
that will independently monitor the unit being serviced. The
CDT-4 has been developed to allow technical or non-technical
personnel to automatically and non-invasively test for errors.
This is accomplished by using our specially prepared CD test
disc and simply connecting the CDT-4 into the external audio
jacks (with computer or CD-ROM, headphone or line out
jack).
The CDT-4 features a multi-segmented display on the front
of the instrument to indicate the number of tests, number and
type of failures, and when during the testing they occurred. A
computer interface is provided to allow the user to view,
store, or create a print-out of the results. This information
is invaluable in allowing the technician to pinpoint the
nature of the problem, and to then effectively solve the
problem.
| Suggested List Price |
$1999.95 |
| Suggested List Price Test CD |
$44.95 |
| DEALER INQUIRIES INVITED |
|
| Model CDT-4 |
| (includes power supply, test CD, manual) |
|
|
|
