Voice, Wood Body

Voice, Acrylic Body

The Voice

 “The Voice” cartridge by The Soundsmith makes a clear statement amidst the other voices of high performance phono cartridges.

 Our statement?? Ikebana. Less is more.

 It overturns the myth that moving coil cartridges are the only path towards perfection. After all, what is the “advantage” of the moving coil type of cartridge? Low effective moving mass, right? We got less. Much less. And if you understand moving mass, Less IS more.

 The 40 year evolution of “The Voice” cartridge affords lower effective moving mass than any of them. Far lower. It even has 40% less than our other moving iron designs! Why is that good? Because when you lower the moving mass, it’s easier to control. If it’s easier to control, the stylus can stay in better contact with the groove walls. That’s good, because if you can’t stay in contact with the groove walls, you can’t hear what’s on the record.

 Is a moving coil preamp required? No. “The Voice” is designed to be used with a Moving Magnet preamp. No transformers. No finicky multi-stage ultra high gain preamp required. Less is more here, too.

 Once you’ve heard “The Voice”, you’ll never go back. The price?? Oh yes, “less is more” applies here too……….


Click here for Stereophile Review of the SMMC1

(or click for our archived .pdf copy of the review)


 

The Voice is available in:
Body: Wood
Acrylic
Compliance: High
Medium
Output: Stereo
Mono
“The Voice” Product Information:
Product Specs (.pdf)
Testimonials
more photos
Other ½” Mount Cartridges:
make a selection from list below,
or click here for model overview
in Wood Body in Acrylic Body
The Voice The Voice
Aida SMMC1
Boheme SMMC2
Carmen SMMC3
Otello SMMC4

The Voice Technical specifications
Stylus

Contact Line Nude, 0.100mm SQ

selected for low noise

Radius of curvature Optimized Contour Contact Line
Cantilever Ruby
Recommended Tracking force: 10mN / 1.0 gm (high)
13mN / 1.3 gm (medium)
Effective tip mass 0.30 mg
Compliance 28 µm/mN (high)
22 µm/mN (medium)
Frequency response 20-20,000 Hz ± 1.0 dB
Channel Separation
(stereo only)
1000 Hz >30 dB
50-15,000 >25 dB
Channel difference <0.5 dB (Stereo)
<1.0 dB (Mono)
Output voltage >0.6 mV/cm/sec.
5 cm/sec. Lat. RMS >2.12 mV
Cartridge weight 6.8 grams
Load: Resistance >/= 47 kohms
Capacity >/= 400 pF