an original MMC20E

SMMC20E

SMMC20E, boxed


SMMC20E

SMMC20E - $249.95 + shipping
**PLEASE NOTE - all cartridges are hand made; we ship from stock OR within 15 working days

The SMMC20E design features:

Elliptical Stylus, Aluminum Cantilever

 

PLEASE NOTE - NON B&O table users;

If you need a 20 series cartridge for your NON B&O table to replace an EXISTING B&O 20 series or equivalent cartridge - PLEASE be aware that you can do so - to order one of our 20 series cartridges that is to be used with NON-B&O Turntable, your turntable must already HAVE an original B&O to 1/2 adapter for this series. You will need there for to order one of our adapter modified models. You CAN order modified versions from our order page in the drop down menu. These do cost a bit more.... Please look carefully on the order page for these modified cartridges to be used on NON B&P tables, which - AGAIN - requires that you already HAVE an original B&O adapter for this series. Please note we do NOT MAKE a 1/2" mount adapter for the 20 series cartridges to allow use on NON B&O tables.

ALL our hand-made cartridges are FULLY warranteed against manufacturing defects for one full year.

Once you have opened the tamper proof seal on your Cartridge box, it CANNOT be returned for refund.

 

Click this to get shipping

costs and ORDERING  INFORMATION

SMMC20E Product Information:
Product Specs (.pdf)
Questions? Try Here
Turntable Model/Lookup Chart
Testimonials
Photo Gallery
Cartridges are also available with mount that can be used in standard ½” mount turntables!
Other B&O Compatible Cartridges:
make selection from list below
or click here for an overview of all cartridges
 
Replacements for original MMC1, 2, 3, 4, and 5 cartridges
(‘newer’ series)
The Voice
SMMC1
SMMC2
SMMC3
SMMC4
 
Replacements for original MMC10/20 series, and MMC3000/4000/5000/6000 series cartridges
(‘classic’ series)
SMMC20CL+
SMMC20CL
SMMC20EN
SMMC20E

SMMC20E Technical specifications
Stylus Elliptical Titanium Bonded , 0.20mm Round
Radius of curvature 6 x 17 µm
Cantilever Aluminum Alloy
Recommended Tracking force: 12mN / 1.2 gm
Effective tip mass 0.50 mg
Compliance 28 µm/mN
Frequency response 20-20,000 Hz +/- 2.5 dB
Channel Separation
(stereo only)
1000 Hz >30 dB
50-15,000 >25 dB
Channel difference <2.0 dB (Stereo)
Output voltage >0.6 mV/cm/sec.
5 cm/sec. Lat. RMS >2.12 mV
Cartridge weight

4.05 grams

Load: Resistance >/= 47 kohms
Capacity >/= 400 pF